Victorian Chimney Flue Construction. Web the traditional method of lining chimney flues was to apply a mix of lime putty and fresh cow dung, known as ‘parge’ as the chimney was built. Web the chimney breasts and flues in older properties were built in traditional brickwork and lime mortar and were built up as the walls of the house were raised.
Chimney wall thickness should be a nominal 4 in. It was not uncommon for old flues to be pargeted (lined) with lime mortar as the chimney was erected, but many were not lined at all. The most obvious use is for gas effect decorative fires or for boilers.
Web Chimneys Were Built Of Ashlar Masonry Or Rubble Masonry, With Bridges Of Slab Or Composite Stone Where There Was More Than One Flue.
Decoration is usually in the shaped brickwork at the top of the stack and in the pots. The chimney was an essential feature of victorian and edwardian houses. The chimney’s level top is provided by the cope, one or more dressed stones.
Web This Is Our Story Of Rebuilding A Period Chimney On Our Victorian Property.
Web there are multiple factors involved in determining the correct size and type of flue liner to use, so a professional chimney sweep or chimney contractor should be consulted for advice and installation. Parging continued to be common until the 1965 building regulations introduced a requirement for all new flues to be built with a liner during construction. It was not uncommon for old flues to be pargeted (lined) with lime mortar as the chimney was erected, but many were not lined at all.
The Most Obvious Use Is For Gas Effect Decorative Fires Or For Boilers.
It was quite an art for the bricklayer to connect the right flues to the right fireplaces and make sure that they all avoided each other. There are, however, several that are accepted nearly everywhere. Web chimneys, despite the basic design, were always being improved as new inventions were thought up to make them more efficient.
Class 1 (Solid Fuel) And Class 2 (Gas).
Written by cruz conarthery tuesday, september 21,. Louis savot, in paris in the 16 th century, made improvements, such as requiring a smoother flue and a narrower fireplace. Chimney wall thickness should be a nominal 4 in.
Web The Traditional Method Of Lining Chimney Flues Was To Apply A Mix Of Lime Putty And Fresh Cow Dung, Known As ‘Parge’ As The Chimney Was Built.
Existing brick chimneys can be fitted with fireplace inserts and stainless steel flues to help improve efficiency. There are two types of liner: Web chimneys in victorian and edwardian houses.
0 Komentar